No products
Prices are tax included
Large range of Casting supplies. Alloys through to resins and pigments. Epoxycast, Epoxyglass in stock. Readily available to order online and ship Australia wide.
These fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal powder are used to give a true metallic effect. Can be buffed, polished and a patina applied if required.
TC-891 A/B incorporates a non-mercury based catalyst system that produces a tough 80 shore D material with a 12- minute work time. Recommended for: Prototypes, Models, Impact Parts, Automotive PartsPotlife & Demould: Work time - 12 mins / Demould time - 3-4 hrsHardness & Type: Shore D80 +/-2 Rigid Polyurethane, 725cps
TC-892 A/B incorporates a non-mercury based catalyst system that produces a tough 80 shore D material with a 20- minute work time. Recommended for: Prototypes, Models, Impact Parts, Automotive PartsPotlife & Demould: Work time - 20 mins / Demould time - 5-6 hrsHardness & Type: Shore D80 +/-2 Rigid Polyurethane, 725cps
WC-783 A/B is an impact resistant, rigid, 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature, castings 1/8” thick or larger can be readily cast. Castings that are less than 1/8” thick generally require a mild post-cure.
WC-595 A/B is a two-part, clear, 90 Shore A polyurethane elastomer. It is recommended for use wherever a tough, flexible, permanently transparent elastomer is required. Recommended for: Lenses, Models, Tinted Parts, Lures, Impact PartsPotlife & Demould: Work time - 15 mins / Demould time - 6 hrsHardness & Type: Shore A90 +/-5 Polyurethane Elastomer, 900cps
WC-786 A/B produces a high impact, rigid, 80 Shore D material that is commonly used to make clear or tinted castings of all kinds. Recommended for: Lenses, Models, Tinted Parts, Lures, Impact PartsPotlife & Demould: Work time - 30 mins / Demould time - 6-8 hrsHardness & Type: Shore D80 +/-2 Rigid Polyurethane, 600cps
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less air entrainment than most and ensures thorough mixing. They save plenty of time and hard work when mixing large amounts of material. Ideal for mixing cost cast urethane foam quickly.
The Monster Makers Foam Latex is unmatched for its quality, dependability and stability. Its unique Chemistry yields a velvety soft foam with extremely fine cells. This makes for beautiful prosthetic blending edges and precision detail reproduction
Product highlights include: exceptional clarity, impact resistant, no odor, and good weather ability. Recommended for: Lenses, Models, Tinted Parts, Lures, Impact PartsPotlife & Demould: Work time - 6 mins / Demould time - 2-3 hrsHardness & Type: Shore D82 +/-2 Rigid Polyurethane, 650cps
Generally referred to as Cabosil. Used as a universal thickener. It is extremely light in weight. Caution should be taken when using this material as it can be hazardous to breath.
Omyacarb 40 is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
These powders give the ultimate metallic leafing finish in resin. Using only a smalll amount into your resin mix you can achieve the most amazing of metal looking finishes.
Can be mixed with a variety of products including forton, polyesters, polyurethanes, Epoxy Resins. Great for use when creating cold cast effects
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape all material from the sides on mixing tubs. Easy to clean off and re-use.
Can be mixed with a variety of products including forton, polyesters, polyurethanes, Epoxy Resins. Great for use when creating cold cast effects
The beaker has a pouring spout and molded permanent graduation markings. These beakers have good chemical resistance.
R-FOAM 33 is a general purpose rigid polyurethane foam product for pour in place applications.
A great multipurpose cleaner for tools and your work area. Will clean up most liquid resin and silicone spills. Safe to use.
Wax sheets is most generally used to simulate metal or part thickness. This grade of wax has been developed to prevent wax deformation under exothermic heat conditions.
