Moulding materials ranging from Fibreglass, Forton, Plasters. We also have a vast range of Silicone Rubbers that you can use for your mould making, otherwise we also have some Ready to use moulds.
Bodywrap bandages 3inch rolls are ideal for rigid case over alginate life casts or as a fast case mould over flexible moulding materials. Great for use in projects involving faces, heads and torsos
M4503 is especially suitable for reproducing models with pronounced undercuts in casting resins. Other materials, such as wax and plaster, may be cast without any problems in moulds made from M4503. Recommended for: General Moulding, Large Parts, Plaster & Resin Potlife & Demould: Work time - 90 mins / Demould time - 24 hrsHardness & Type:...
195gm plain weave cloth. This is an open weave and medium weight cloth ideal for general polyester and epoxy layups requiring good strength. Works exceptionally well with FMG.
These longer strands are produced from our gun roving on site and are great for heavier putties. They are most commonly used for hand layups with FMG and are very easy to use. Non-alkali resistant fiberglass.
Ultracal 30 is the most widely used gypsum cement with the lowest expansion rate available. The industry standard for casting of foam latex. Highest strength with less tendency to warp. Excellent for case moulds, close tolerance tooling and applications requiring exceptional hardness.
Bung taps. Without these a 20lt pail can be a handful to dispense from. The standardized thread suits most packaging design for a bung tap. Place your pail of polyurethane on the bench, turn the tap and away you go. No sore back and no spillage.