TINSIL GEL 10 is a pourable, condensation-curing two component silicone rubber that cures at room temperature.
Recommended for:Animatronics, SFX skins and parts, Creature suits and Simulated skin/flesh
Potlife & Demould: Work time – 45 min / Demould time – 16 hrs (Full Cure after 48 hrs)
Hardness & Type: Shore A 10 (approx), 10,000cps
Due to the excellent mechanical properties of the cured rubber, TINSIL GEL-10 is especially suitable for reproducing models with very large undercuts in casting resins such as polyurethane, epoxy and polyester. It is the best choice for producing moulds for delicate parts. Other materials such as wax and plaster may be cast without any problems in moulds made from TINSIL GEL-10.
TINSIL GEL-10 can be mixed with Sil-Thix thickener for a brush-on layer.
Refer to the Technical Data Sheet (TDS) for further information.