A low strength addition curing, two component silicone rubber that cures at room temperature and features excellent flow due to its low viscosity, low tear strength, low elongation and excellent clarity. This is a great choice of product for simulating crushed or broken glass where hard and sharp products can be dangerous. Demould within the hour after mixing to prevent crumbling upon demoulding.
Previous product
Back to products
Zap-a-Gap (Green)
$18.70 – $60.50 (inc. gst)
Next product
Pressol Graphite Powder
$13.20 (inc. gst)
Breakable Glass Silicone Rubber
SKU: SR-BG
$110.00 – $3,190.00 (inc. gst)
SKU: SR-BG
Categories: Finishing & Specialty, SPFX
Related products
Clear Guard Spray
$66.00 (inc. gst)
Clear Guard Spray is a protective lacquer for all metals which guards against sun, mild acids, salts, heat and water.
M20 (Dip) Black Patina
$22.00 – $495.00 (inc. gst)
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Steel Wool 500gm
$22.00 – $44.00 (inc. gst)
Steel Wool may be used to abrade the surface of cold cast parts to expose the metal particles within the
Bronze B Coating
$39.60 – $495.00 (inc. gst)
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Wet & Dry Sandpaper
$2.42 (inc. gst)
Wet and Dry sandpaper is perfect for sanding metals, automotive finishes and for sanding resin down to a smooth finish.
Zap-a-Gap (Green)
$18.70 – $60.50 (inc. gst)
Zap-a-Gap superglue allows 7 to 10 seconds for positioning, 20 seconds cure time. To accelerate use Zip Kicker. Bonds anything
Z-Ends & Tubing
$11.55 (inc. gst)
Into, under, around, or through, Z-ENDS extend the length of ZAP bottle nozzles for getting into hard-to-reach areas. Use Z-ENDS
Tan Patina
$17.60 – $220.00 (inc. gst)
Tan Patina creates an opaque tan finish on all metals. It is applied hot or cold depending on the surface.