A low strength addition curing, two component silicone rubber that cures at room temperature and features excellent flow due to its low viscosity, low tear strength, low elongation and excellent clarity. This is a great choice of product for simulating crushed or broken glass where hard and sharp products can be dangerous. Demould within the hour after mixing to prevent crumbling upon demoulding.
Previous product
Back to products
Zap-a-Gap (Green)
$18.70 – $60.50 (inc. gst)
Next product
Pressol Graphite Powder
$13.20 (inc. gst)
Breakable Glass Silicone Rubber
$110.00 – $3,190.00 (inc. gst)
Related products
Steel Wool 500gm
Steel Wool may be used to abrade the surface of cold cast parts to expose the metal particles within the
Wet & Dry Sandpaper
Wet and Dry sandpaper is perfect for sanding metals, automotive finishes and for sanding resin down to a smooth finish.
Bronze B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Copper B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Brass B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Zip Kicker Refill 8oz
ZIP KICKER Super-Glue Accelerator is the best working accelerator for ZAP and Other Super Glues. A Little Spritz Works in
Slate Patina
Slate Black Patina is a versatile black finish for use on most metals. On iron and steel, it will produce
Isopropyl Myristate
Isopropyl Myristate is an oil based remover that is incredibly gentle on the skin. Good for removing regular make-up, grease
