ELASTOSIL® E43 N – Transparent Silicone Adhesive 300g
ELASTOSIL® E43 N from WACKER is a versatile, one-part, transparent silicone adhesive and sealant designed for bonding, sealing and gasket applications. This ready-to-use RTV-1 silicone cures when exposed to atmospheric moisture, forming a permanently flexible silicone rubber with excellent mechanical properties.
Offering good adhesion to many surfaces without the need for a primer, E43 N is suitable for a variety of creative, industrial and technical applications. Once fully cured, it provides excellent resistance to moisture, weathering, UV exposure and temperatures ranging from -50°C to +180°C.
Key Features
- One-part silicone: Ready to use without measuring or mixing components.
- Transparent finish: Cures to a flexible, transparent silicone rubber.
- Excellent adhesion: Bonds to many surfaces, including glass, ceramics, metals, plastics and powder-coated surfaces.
- Fast skin formation: Forms a surface skin in approximately 5–10 minutes at 23°C and 50% relative humidity.
- Flexible and durable: Shore A 30 hardness with 450% elongation at break.
- Temperature resistant: Recommended service temperature range of -50°C to +180°C once fully cured.
- Weather and UV resistant: Suitable for applications exposed to changing environmental conditions.
- Platinum silicone compatible: Does not inhibit the curing of platinum-cure silicones.
- Food contact applications: Suitable for certain food contact applications when fully cured and used in accordance with the manufacturer’s specified regulatory requirements.
Typical Applications
- General-purpose silicone bonding and sealing
- Formed-in-place gaskets (FIPG)
- Bonding glass, ceramics, metals and compatible plastics
- Household appliance assembly and maintenance
- Mechanical engineering and industrial applications
- Applications requiring flexible, weather-resistant silicone bonds
How to Use
ELASTOSIL® E43 N is supplied ready to use and requires no additional catalyst or mixing. Apply the silicone to a suitable surface and allow it to cure through exposure to atmospheric moisture.
At 23°C and 50% relative humidity, the silicone typically forms a skin within 5–10 minutes and cures at approximately 1.6mm per day. Actual curing times will vary depending on application thickness, temperature and humidity.
As this is a moisture-curing silicone, adequate access to atmospheric moisture is essential for complete curing. Thick sections and enclosed applications may require considerably longer curing times.
Technical Specifications
- Manufacturer: WACKER
- Product: ELASTOSIL® E43 N Transparent
- Type: One-part RTV-1 silicone adhesive
- Cure system: Acetoxy condensation cure (moisture curing)
- Colour: Transparent when cured
- Skin formation: 5–10 minutes
- Curing speed: Approximately 1.6mm per day
- Hardness: Shore A 30
- Tensile strength: 7.8 N/mm²
- Elongation at break: 450%
- Tear strength: 12.5 N/mm
- Service temperature: -50°C to +180°C
- Pack Size: 300g tube
Important Information
ELASTOSIL® E43 N releases acetic acid during curing. Use in a well-ventilated area and avoid prolonged exposure to curing vapours. The uncured material may cause irritation to the eyes and mucous membranes.
Although the cured silicone is suitable for certain food contact applications, compliance depends on the intended application and applicable regulatory requirements. Refer to the manufacturer’s Technical Data Sheet for further information.
Always conduct a small compatibility and adhesion test before use, particularly on sensitive surfaces or when working with unfamiliar materials.
Store in a cool, dry place and refer to the product packaging for the best-before date.


