Stone Coat Countertops carefully selected MONTANA spray paints for their compatibility with Stone Coat Epoxy. Use the Hologram Glitter Spray Paint to add holographic glitter particles to your resin pour. Semi-gloss translucent paint is the vehicle base carrying the high quality fine holographic glitter particles for a sensational metallic effect that can add a totally new dimension to all kinds of surfaces. Besides Stone Coat resin, this may be used with paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic, and just about any other paintable surface. Once applied, the semi gloss lacquer layer will have embed a fine distribution of holographic particles over the substrate. The more coats applied, the greater the intensity of the effect. Applying a layer of resin on top of the Glitter with Stone Coat Art Coat or Countertop resin will not only protect the surface of your work, it will also allow more light to enhance the effect further and add depth to your project. This product creates a base effect and should not be mixed in to the uncured resin. The final result will be significantly influenced by the color and gloss level of the undercoat. Not compatible with Synthetic based paints!
Shake Well! Due to the weight of the pigments, for best results it is important to shake the can well for at least 3 minutes before starting and to re-shake for at least 10 seconds after each spray application regardless of the time between sprays. This will guarantee the pigments are correctly mixed with the paint vehicle. The Hologram Glitter Effect spray is best applied to a smooth level surface to show greater light variation. Undulations in the substrates surface may detract from the impact of the holographic effect. Application of multiple, thin, light coats will build up the particle saturation and intensify the effect.
Surfaces should be clean and dry. Shake can well for 2-3 minutes! Apply the spray at a distance to the object of 20 – 30cm. Best holographic effect can be achieved on even surfaces the darker the surface, the stronger the effect. Let an undercoat fully cure then apply several thin even layers. Allow min. 5 minutes drying time between coats. Shake the can well again after pausing to avoid sedimentation of glitter particles the more layers, the stronger the hologram effect. Dust dry after approx. 10 min. Touch dry after approx. 60 min. Fully cured after approx. 24 hours.