No products
Prices are tax included
TC-891 A/B incorporates a non-mercury based catalyst system that produces a tough 80 shore D material with a 12- minute work time. Recommended for: Prototypes, Models, Impact Parts, Automotive PartsPotlife & Demould: Work time - 12 mins / Demould time - 3-4 hrsHardness & Type: Shore D80 +/-2 Rigid Polyurethane, 725cps
TC-892 A/B incorporates a non-mercury based catalyst system that produces a tough 80 shore D material with a 20- minute work time. Recommended for: Prototypes, Models, Impact Parts, Automotive PartsPotlife & Demould: Work time - 20 mins / Demould time - 5-6 hrsHardness & Type: Shore D80 +/-2 Rigid Polyurethane, 725cps
WC-783 A/B is an impact resistant, rigid, 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature, castings 1/8” thick or larger can be readily cast. Castings that are less than 1/8” thick generally require a mild post-cure.
WC-786 A/B produces a high impact, rigid, 80 Shore D material that is commonly used to make clear or tinted castings of all kinds. Recommended for: Lenses, Models, Tinted Parts, Lures, Impact PartsPotlife & Demould: Work time - 30 mins / Demould time - 6-8 hrsHardness & Type: Shore D80 +/-2 Rigid Polyurethane, 600cps
R-FOAM 33 is a general purpose rigid polyurethane foam product for pour in place applications.
The F125 A/B flexible polyurethane system is a production oriented fast gel and fast demould material. Recommended for: Parts, Moulds, SFX, Props, Skins, PottingPotlife & Demould: Work time - 6-7 mins / Demould time - 2-3 hrsHardness & Type: Shore A25 +/-5 Polyurethane Elastomer, 1250cps
WC-565 A/B is a two-part, water clear, colorless aliphatic based polyurethane elastomer. Recommended for: Lenses, Models, Tinted Parts, Lures, Impact PartsPotlife & Demould: Work time - 15 mins / Demould time - 6 hrsHardness & Type: Shore A60 +/-5 Polyurethane Elastomer, 1400cps
WC-782 A/B is an impact resistant, rigid, 82 Shore D material that is commonly used to make clear or tinted castings of all kind. Recommended for: Lenses, Models, Tinted Parts, Lures, Impact PartsPotlife & Demould: Work time - 15 mins / Demould time - 6-8 hrsHardness & Type: Shore D82 +/-2 Rigid Polyurethane, 650cps
TC808 Polyurethane Resin is a low viscosity, rapid setting, and rigid urethane compound Recommended for: Model Kits, Small parts, Props, Thermoplastic FeelPotlife & Demould: Work time - 1.5 mins / Demould time - 10-20 minsHardness & Type: Shore D78 +/-2 Rigid Polyurethane, 250cps
