Moulding materials ranging from Fibreglass, Forton, Plasters. We also have a vast range of Silicone Rubbers that you can use for your mould making, otherwise we also have some Ready to use moulds.
The Flexible Bowl is recommended for use with alginate and plaster as a mixing container.
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less air entrainment than most and ensures thorough mixing. They save plenty of time and hard work when mixing large amounts of material. Ideal for mixing cost cast urethane foam quickly.
lightweight breathable disposable protective clothing
Protect workers respiratory systems with this user-friendly North® 7700 Series face mask
Silicone Pigments are suitable for coloring addition and condensation cure RTV silicones. Can also be used to colour your silicone catalyst for easier mixing.
Forton® VF-774 is an all acrylic, co-polymer dispersion (51% solids) specifically formulated for the GFRC production process. VF-774 is UV stable. It is further formulated to be stable and durable in the high pH Portland cement-based GFRC composite
Touch up brush. Avaliable in 4mm and 10mm.
Platsil 71R Retarder is added to Platsil Gel-10 Part A prior to mixing with Part B to slow the cure giving a longer potlife and demould time. Adding 1% of the total A:B mix will roughly double the working time, 2% will triple the work time and 5% will extend the potlife to approximately 60 minutes. Care must be taken at high ratios as rates over 5% may...
Flexible Can spouts to assist in the pouring from one container to another.
3cfm Pump & 6L Chamber Great for our Resins & SiliconesStainless Steel Chamber Transportable, Mobile & Light Weight
Small Hex Faceted bangle mould is a premade silicone moulds can be used with all our resins for creating beautiful jewellery pieces. Note: all measurements are approximate due to handmade nature and may change when sanded.
A perfect solution for ensuring air is released from your chopped strand mat. Simply roll away the air. Ideally suited for flat areas, but will work along the radius of curves too
Dust Mask x 50 in box.
Pourable, condensation-curing, two component silicone rubber that cures at room temperature. Recommended for: Economical Moulding, Concrete, Plaster, ResinPotlife & Demould: Work time - 15 mins / Demould time - 6-24 hrsHardness & Type: Shore A28 +/-2 Silicone Elastomer, 30000cps
Driscoll Polyester Parfilm Ultra 4 Mold Release is a micro-thin film forming release agent impedes the degradation of the mold and yields longer mold life.
A cheap and economical apron ideal for single use applications. Made from LDPE these aprons are white and are a full size bib style measuring 71cm x 117cm.
Protect hands from solvents, epoxy, silicone, lacquer, grease, oil, paint, fiberglass, acetone, superglue, PVC adhesives, dirt, grime, magic marker, ink