Call Us / Visit us!
Head office: 1300 731 497 Map
Newtown Store: 02 9557 9056 Map
Chatswood Store: 02 8730 1970 Map
Richmond Store: 03 9428 5511 Map
Brunswick Store: 03 8374 6650 Map
Brisbane Store: 07 3304 6010 Map
Please login or create account
Moulding materials ranging from Fibreglass, Forton, Plasters. We also have a vast range of Silicone Rubbers that you can use for your mould making, otherwise we also have some Ready to use moulds.
M4644 is a high performance silicone mould-making compound that is suitable for reproducing models with undercuts in polyurethane or epoxy resins. M4644 is also a Food Grade Silicone Rubber Recommended for: Food Grade, Concrete, Plaster, Epoxy, PolyurethanePotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness & Type: Shore A40...
Elastosil M4670 is suitable for food contact when cured properly and ideal for use with low melt alloys. M4670 is also a Food Grade Silicone Rubber. Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 60 mins / Demould time - 24 hrsHardness & Type: Shore A55 +/-2 Silicone Elastomer, 80000cps
M4642 is perfectly suitable for all moulds with undercuts that are to be reproduced in casting resins, & a certain inherent rigidity of the mould is required. M4642 is a food grade silicone rubber. Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness...
Elastosil® M4601 is perfectly suitable for all moulds of models with pronounced undercuts that are to be reproduced in casting resins. M4601 is also a Food Grade Silicone Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness & Type: Shore A28 +/-2...
Made of 100% Nylon strapping with locked metal fasteners. Used to band most sizes and shapes of moulds for a tighter fit. All mould straps are 1 inch in width
Measuring Cup can be used to measure up your silicones or resins. We have them in 30ml and 60ml
Measuring Cup can be used to measure up your silicones or resins. We have them in 30ml and 60ml
Our gloves have superior puncture and chemical resistance. They have a textured finish making it easy to pick up items. They comfortable to wear, and fit either hand. Also available in boxes of 100 gloves
This is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages of this fiber will impart improved strength and chip/crack resistance on your FMG castings. Can also be used as a premium product when hand laying FMG in replacement of the 20-40 strands. The strand properties are 12mm long, 14 micron diameter...
USG Pottery plaster is highly uniform, noted for outstanding performance and long life. Ideal for running slip latex, sanitaryware and dinnerware.
Ultracal 30 is the most widely used gypsum cement with the lowest expansion rate available. The industry standard for casting of foam latex. Highest strength with less tendency to warp. Excellent for case moulds, close tolerance tooling and applications requiring exceptional hardness.
Nitrile gloves making them suitable for people with allergies to natural rubber latex. Stronger than standard latex or vinyl disposable gloves. Offer superior flexibility and touch.
Excellent replacement for latex - No latex protein - Provides excellent strength and durability Enhanced feel and comfort for better donning & use
White Hydrocal is a gypsum product used for slip latex moulds and case moulds. Offers slightly better heat resistance than pottery plaster with higher wet and dry strengths.
Hydrostone TB is one of the hardest and strongest gypsum cements. Slightly higher setting expansion than hydrocal, but is ideal in case moulds, press and stretch dies. The most widely used product for solid casts and statuary.
Hydrocal 105 is a good strong mould material. Commonly known as buff stone, an off colored stone ideal for sculpting prosthetics. For dental stones with controlled expansion
Platsil Gel-00 Prosthetic grade addition-curing, two component silicone rubber that cures at room temperature. Recommended for: Skins, Prosthetics, SFX, Props, Lifecasting, Tinted PartsPotlife & Demould: Work time - 6 mins / Demould time - 30 minsHardness & Type: Shore 00-30 +/-2 Silicone Elastomer, 22000cps