Large range of Casting supplies. Alloys through to resins and pigments. Epoxycast, Epoxyglass in stock. Readily available to order online and ship Australia wide.
Slate Powder is a general filler for bulking out resins to reduce price. Fantastic in clear polyester resin to create black bases and busts.
Add PolyFibre thickener to liquid polyurethane plastics or rubbers to thicken for brush-on application or to make mold shells.
Small Safety Goggles helps in protection of eyes from dust particles, hazardous fumes and even liquid.
A1 Filters protect against organic gases and vapours. Filters are specially designed and shaped to give "swept-back" position to enable excellent field of vision and balance.
P2 particulate filter that can be used in industries where excess levels of particulates are present in the workplace atmosphere
Driscoll Polyester Parfilm Ultra 4 Mold Release is a micro-thin film forming release agent impedes the degradation of the mold and yields longer mold life.
This material allows the user to laminate fibreglass moulds directly onto wet clay. The vinyl spray is applied to the clay surface as a barrier coat to seal in any moisture from the clay sculpt or walls. Use in conjunction with a suitable release agent such as J-Wax. The Vinyl Spray also imparts some protective properties to the sculpt while the moulds...
For use with Barnes resin moulds.
Made with the highest quality refined Carauda Wax. Provides high gloss, ease of application, high heat and chemical resist properties. Excellent release or parting ability. Can be used in conjunction with PVA Release.
Mirror Glaze No.8 is a blend of waxes specially formulated to provide the maximum number of releases per application. Especially useful on tooling and new moulds.
Stoner A324 Rapid Release is specially formulated to release molded silicone rubber, thermoset plastics, rubber, and similar materials. It provides a long lasting, thin-layer of anti-stick coating for fast, easy part removal from metal, plastic, rubber, and even silicone rubber molds.
Stoner E302 Rocket Release is an extremely versatile release agent which is generally acceptable for applications where a food grade release is required. In many applications, Rocket Release is considered to be the most paintable release agent available when molding plastics and similar materials.
Stoner E236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes. A light coating produces best results.