Addition Cured

There are 27 products.

A great range of addition curing silicones. Make sure you read the technical data sheet before using new products. Note: several of these silicones require the use of digital scales for accurate measuring.

Showing 25 - 27 of 27 items
  • Transil
    Availability: In Stock
    Transil - Translucent Silicone Rubber
    SR-TRANSIL

    Transil is a two-component, addition curing, low viscosity silicone designed for taking very fast impressions.  Recommended for: Fast Moulds, Small Moulds, Tinted Parts, Fine DetailsPotlife & Demould: Work time - 6 mins / Demould time - 30 minsHardness & Type:  Shore A20 +/-2 Silicone Elastomer, 2500cps

    $39.27
  • Sil-Thix
    Available
    Sil-Thix Silicone Thickener
    SR-SILTHIX

    Sil-Thix is a unique thickener for most Silicone Mould Making Rubbers. It can be used with both Condensation and Addition Curing Systems. We recommend a maximum of 3% in Addition Cure Grades and 5% in Condensation Cure Grades. Sil-Thix CANNOT be used in M4503 or Ultrasil. We recommend a test for any non Barnes Systems.

    $19.80
  • PLATSIL 71-11
    Available
    PLATSIL 71-11
    SR-PLATSIL7

    Replacement for Banana Skin

    $71.50