Barnes have a large range of Silicone Rubber.Includes Pinkysil, Ultrasil,M4503. Oddbod, newly created lifecasting silicone in conjunction with Oddstudio is now available
Use for thickening silicone RTV3428.
Banana Skin is ideal for skin moulding as well as for moulds with large undercuts. It has a high tear strength and high elongation.
A low strength addition curing, two component silicone rubber that cures at room temperature and features excellent flow due to its low viscosity, low tear strength, low elongation and excellent clarity. This is a great choice of product for simulating crushed or broken glass where hard and sharp products can be dangerous. Demould within the hour after...
C1200 has been specifically developed for the professional production of reusable vacuum bags, used in the production of composite parts. Due to its shear thinning behaviour it will be self levelling, yet not run off vertical surfaces
Smith's Theatrical Prosthetic Deadener can be used at up to 250% with PLATSIL GEL-10 to simulate human tissue. Deadener is especially suited for applications where a "soft or dead feel" is desired as it will not leach from the silicone surface as standard silicone oils/softeners will.
Elastosil M 4470 is a 60 duro RTV-2 silicone rubber. This condensation-curing silicone vulcanizes at room temperature with the addition of either of two catalysts.
Due to the excellent mechanical properties of the cured rubber as well as its high resistance to casting resin, ELASTOSIL® M4503 is especially suitable for reproducing models with pronounced undercuts in casting resins. Other materials, such as wax and plaster, may be cast without any problems in moulds made from M4503.
Due to its outstanding resistance to casting resins as well as superior mechanical properties, Elastosil® M4601 is perfectly suitable for all moulds of models with pronounced undercuts that are to be reproduced in casting resins. M4601 is also a Food Grade Silicone
Due to its outstanding resistance to casting resins as well as superior mechanical properties, Elastosil® M4642 is perfectly suitable for all moulds of models with undercuts that are to be reproduced in casting resins, and a certain inherent rigidity of the mould is required.M4642 is also a food grade silicone rubber.
Elastosil® M4644 is a high performance silicone mould-making compound which is particularly suitable for reproducing models with undercuts in polyurethane or epoxy resins. The main field of application is hand casting, vacuum casting and low pressure casting for rapid prototyping.M4644 is also a Food Grade Silicone Rubber
Elastosil M4670 has a high tear strength and a shore hardness of approximately 55. It is suitable for food contact when cured properly and ideal for use with low melt alloys.M4670 is also a Food Grade Silicone Rubber
ODDBOD is a smooth viscosity, long lasting addition curing silicone rubber designed for lifecasting. ODDBOD is applied directly to the skin to make moulds of the hands, face or other body parts and sets at room temperature. ODDBOD is suitable for most casting materials. Pinkysil oddbod is a skin safe silicone.
Pinkysil Putty is a flexible silicone impression putty. A kneadable, addition-curing two component silicone putty that cures at room temperature with a convenient 1:1 ratio, colour indicator for mixing and extremely fast cure. The unique putty consistency allows the manufacture of quick impression moulds from practically any surface.
Pinkysil silicone is a super fast setting, certified skin safe silicone. User friendly with its 1:1 mix ratio by volume. Pinkysil is ideal for achieving small intricate details. No need for scales or degassing.
Platsil 71R Retarder is added to Platsil Gel-10 Part A prior to mixing with Part B to slow the cure giving a longer potlife and demould time. Adding 1% of the total A:B mix will roughly double the working time, 2% will triple the work time and 5% will extend the potlife to approximately 60 minutes. Care must be taken at high ratios as rates over 5% may...
Although Platsil Gel-10 is a fast curing product, certain applications require an extremely fast turn around. Platsil Accelerator is mixed into the GEL-10 Part B prior to adding Part A. Adding 4-5% of the total A:B mix will reduce the potlife to approximately 3 minutes with a 10 minute demould. Testing should always be performed to determine the best...
Platsil Gel-00 Prosthetic grade addition-curing, two component silicone rubber that cures at room temperature and features: very fast cure, 1:1 mixing by weight, very low Shore 00 Hardness (approx 30), Versatility of thickeners, retardants and accelerants, and is the industry standard for film prosthetics.
Platsil Gel-10 is a versatile silicone for making prosthetic makeups, small creatures and other special effects applications. When used with Smith's Theatrical Deadener it will product a "dead" feel and will not leach out as other silicone fluids and dilutors will.
Used for thickening PlatSil Gel-10 and enabling brushing or layering of the liquid silicone. Adding 1% by weight to the total mix will create a light bodied, non sag gel. Adding amounts up to 5% will create a thicker mix.
Translucent, flowable, addition cure silicone which has an excellent mould life for use with polyurethane resins. Commonly used for concrete and plaster production.