Release Agents

There are 17 products.
Showing 1 - 17 of 17 items
  • Challenge 95
    Availability: In Stock
    Challenge 95 Release Agents

    Challenge 95 is primarily a release for flexible and rigid polyurethane elastomers and foams.  It can be used for other polyurethane systems as well, however, it is advisable to test prior to its use.  Challenge 95 is a universal release for plaster, metal, urethane, and epoxy molds.

  • Conc. Silicone Spray 400gm
    Availability: In Stock
    Concentrated Silicone Spray 400gm

    Silicone Spray is the best spray lubricant for general-purpose lubrication and is CFC free. It is a formulated lubricant with a temperature range between – 30°C to +200°C.

  • Dental Separator
    Availability: In Stock
    Dental Separator

    Water based dental separator. Used in dental acrylic processes and for floating off multiple appliance sculptures when sculpting on plaster and white hydrocal.

  • Flexi-Coat Release
    Availability: In Stock
    Flexi-Coat Release

    Water based release. An emulsion of silicone oils and resins. When used with a spray applicator, it is an economical alternative to aerosol release agents. The use of a soft brush to distribute the release agent evenly may improve results. Primary use is for polyurethane and latex moulds when casting cement based products.

  • J-Wax
    Availability: In Stock

    Classed as a general purpose release agent, however it far surpasses most release systems on the market. Designed for use at moderate temperatures where a silicone release is not desired. It provides a matte finish when applied and can also be polished when applied to rigid surfaces. J-WAX is perfect to PU-PU moulding. 

  • Meguiars No.8 Mirror Glaze 310g
    Availability: In Stock
    Meguiars No.8 Mirror Glaze 310g

    Mirror Glaze No.8 is a blend of waxes specially formulated to provide the maximum number of releases per application. Especially useful on tooling and new moulds.

  • Parafilm Ultra 4 Epoxy Mould Release
    Availability: In Stock
    Parafilm Ultra 4 Epoxy Mould Release

    Driscoll Polyester Parfilm Ultra 4 Mold Release is a micro-thin film forming release agent impedes the degradation of the mold and yields longer mold life.

  • Petroleum Jelly
    Availability: In Stock
    Petroleum Jelly

    Snow white food grade petroleum jelly. A great general purpose lubricant/release/sealer for various applications around the moulding workshop.

  • Petroleum Jelly
    Availability: In Stock
    Petroleum Jelly 100ml

    Snow white food grade petroleum jelly. A great general purpose lubricant/release/sealer for various applications around the moulding workshop.

  • Pure Lube Mould Soap
    Availability: In Stock
    Pure Lube Mould Soap

    This is a versatile lubricant for use as a mould separator. It can be used full strength or diluted with water. Most popular for plaster and gypsum moulds.

  • PVA Release
    Availability: In Stock
    PVA Release

    A special formula release agent for the fiberglass industry. This product is designed to prevent lamination of the product to the mould. Preventing the mechanical or chemical bonding of the molded material to the surface of the mould. PVA is a film-forming solution, which places a positive barrier between the mould and the product or component.

  • Resin Mould Wax 50gm
    Availability: In Stock
    Resin Mould Wax 50gm

    For use with Barnes resin moulds.

  • Stoner A324 Sil/Release Rapid
    Availability: In Stock
    Stoner A324 Sil/Release Rapid

    Stoner A324 Rapid Release is specially formulated to release molded silicone rubber, thermoset plastics, rubber, and similar materials. It provides a long lasting, thin-layer of anti-stick coating for fast, easy part removal from metal, plastic, rubber, and even silicone rubber molds.

  • Stoner E236 Urethane Release
    Availability: In Stock
    Stoner E236 Urethane Release

    Stoner E236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes. A light coating produces best results.

  • Stoner E302 Rocket Release
    Availability: In Stock
    Stoner E302 Rocket Release

    Stoner E302 Rocket Release is an extremely versatile release agent which is generally acceptable for applications where a food grade release is required. In many applications, Rocket Release is considered to be the most paintable release agent available when molding plastics and similar materials.

  • TR-102 Regular Paste Wax
    Availability: In Stock
    TR-102 Regular Paste Wax

    Made with the highest quality refined Carauda Wax. Provides high gloss, ease of application, high heat and chemical resist properties. Excellent release or parting ability. Can be used in conjunction with PVA Release.

  • Vinyl Strip Spray 400gm Can
    Availability: In Stock
    Vinyl Strip Spray 400gm Can

    This material allows the user to laminate fibreglass moulds directly onto wet clay. The vinyl spray is applied to the clay surface as a barrier coat to seal in any moisture from the clay sculpt or walls. Use in conjunction with a suitable release agent such as J-Wax. The Vinyl Spray also imparts some protective properties to the sculpt while the moulds...