Mould it

There are 139 products.

Moulding materials ranging from Fibreglass, Forton, Plasters. We also have a vast range of Silicone Rubbers that you can use for your mould making, otherwise we also have some Ready to use moulds.

Showing 1 - 24 of 139 items
  • 11013 Thixo
    SR-11013

    Use for thickening silicone RTV3428.

    $168.63
  • 25mm Chopped Strands
    FG-CS20

    These longer strands are produced from our gun roving on site and are great for heavier putties.  They are most commonly used for hand layups with FMG and are very easy to use.  Non-alkali resistant fiberglass.

    $29.70
  • Accucast Alginate 390-S2
    ACCU390

    Accu-cast 390 alginate is light yellow/buff in colour. It sets in approximately 3 minutes using 32 degrees Celsius water. Accucast alginate produces high detail when smooth mix achieved. Can be mixed very thin and will set firm and strong, with good tear strength. Ideal for small life casting projects like hands in a mould.

    $41.80
  • Accucast Alginate 880
    ACCU880

    Accu-cast 880 alginate is ideal for very large life casting projects like large props and body parts. Also ideal for use in hot environments where other alginates set too quickly. Light blue in colour.

    $41.80
  • Accucast Alginate IBG
    ACCUIBG

    Accu-cast IBG alginate is ideal for medium-sized life casting projects like faces, heads and torsos. Orange in colour.

    $41.80
  • Accucast Alginate LS680
    ACCU680

    Accu-cast 680 alginate is ideal for medium-sized projects, especially faces and heads. It is green in colour and sets in approximately 6 minutes.

    $41.80
  • AF104-100 Metres 265g - 7.8oz
    FG-AR104-M

    A heavier 265g plain weave cloth utilizing heavier woven rovings for reinforcing larger parts and moulds.

    $9.90
  • Alginate Bonder
    ABON

    Alginate will not adhere to itself once it has set up. Using alginate bonder between coats will allow alginate to stick together. Great for those small areas where there just wasn't enough build-up.

    $6.05
  • AR AntiCrak Fibre
    FG-ANTICRAK

    This is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages of this fiber will impart improved strength and chip/crack resistance on your FMG castings. Can also be used as a premium product when hand laying FMG in replacement of the 20-40 strands. The strand properties are 12mm long, 14 micron diameter...

    $13.20
  • Banana Skin Silicone Rubber
    SR-BANANA

    Banana Skin is ideal for skin moulding as well as for moulds with large undercuts. It has a high tear strength and high elongation.

    $39.60
  • Bodywrap Bandage 3 inch Roll
    PLA-BUG3-R

    Bodywrap bandages 3inch rolls are ideal for rigid case over alginate life casts or as a fast case mould over flexible moulding materials. Great for use in projects involving faces, heads and torsos

    $4.40
  • Bodywrap Bandage 6 inch Roll
    PLA-BUG6-R

    Bodywrap bandages 3inch rolls are ideal for rigid case over alginate life casts or as a fast case mould over flexible moulding materials. Great for use in projects involving faces, heads and torsos

    $6.60
  • Bodywrap Bandage 8 inch Roll
    PLA-BUG8-R

    Bodywrap bandages 3inch rolls are ideal for rigid case over alginate life casts or as a fast case mould over flexible moulding materials. Great for use in projects involving faces, heads and torsos

    $8.80
  • Breakable Glass Silicone Rubber
    SR-BG

    A low strength addition curing, two component silicone rubber that cures at room temperature and features excellent flow due to its low viscosity, low tear strength, low elongation and excellent clarity. This is a great choice of product for simulating crushed or broken glass where hard and sharp products can be dangerous. Demould within the hour after...

    $82.50
  • Broadband Bangle Mould
    MLD-B3

    Our Broadband Bangle Mould is a premade silicone moulds can be used with all our resins for creating beautiful jewellery pieces. Note: all measurements are approximate due to handmade nature and may change when sanded.

    $42.95
  • Brush Latex
    BLATEX

    Brush latex is a moulding compound based on pre-vulcanized natural rubber latex. Pre-vulcanized latex is recommended for mould production as it only requires drying to give a strong elastic film. 

    $19.80
  • Casting Plaster
    USG-CP

    Regular casting plaster used for quick casts into alginate or latex moulds.

    $12.10
  • Challenge 95
    R-CHAL95

    $46.20