ELASTOSIL® A07 is a free flowable, solvent-based RTV-1 silicone dispersion. It cures at room temperature or elevated temperature by reaction with air humidity to a flexible silicone coating. During cure it splits off an organic amine. Special features - ready-to-use, one-component system- low viscosity- low module- solvent bourne- excellent primerless...
Elastosil M 4470 is a 60 duro RTV-2 silicone rubber. This condensation-curing silicone vulcanizes at room temperature with the addition of either of two catalysts.
M4503 is especially suitable for reproducing models with pronounced undercuts in casting resins. Other materials, such as wax and plaster, may be cast without any problems in moulds made from M4503. Recommended for: General Moulding, Large Parts, Plaster & ResinPotlife & Demould: Work time - 90 mins / Demould time - 24 hrsHardness & Type:...
Catalyst to be used with Soft Trans
Soft Trans is a high strength, condensation cure silicone with excellent flow and perfect for soft moulds. It has a shore hardness of approximately 12 ~ 14. Used widely in the special effects industry. Recommended for: Skins, SFX, Props, Tinted Parts, MouldsPotlife & Demould: Work time - 90 mins / Demould time - 24 hrsHardness & Type: Shore A15...
T35 Catalyst is a Catalayst to be used with M4503
T37 Catalyst is a Catalyst to be used with M4470
Extra Catalyst for T47.
A colorless, cloudy medium viscosity liquid with a faint odor. Exclusively used to thicken those condensation curing RTV-2 silicone rubber grades of the elastosil M45 series which are flowable as supplied.
Pourable, condensation-curing, two component silicone rubber that cures at room temperature. Recommended for: Economical Moulding, Concrete, Plaster, ResinPotlife & Demould: Work time - 15 mins / Demould time - 6-24 hrsHardness & Type: Shore A28 +/-2 Silicone Elastomer, 30000cps
Ultrasil Pro Silicone Rubber is a medium strength, two component, tin catalysed, RTV silicone rubber. Recommended for: Fast Moulds, Plaster & ResinPotlife & Demould: Work time - 20 mins / Demould time - 6-15 hrsHardness & Type: Shore A25 +/-2 Silicone Elastomer, 30000cps