Addition Cured

There are 27 products.

A great range of addition curing silicones. Make sure you read the technical data sheet before using new products. Note: several of these silicones require the use of digital scales for accurate measuring.

Showing 1 - 24 of 27 items
  • PlatSil Thixo Silicone Rubber
    Out of stock
    PlatSil Thixo Silicone Rubber
    SR-PLATTHIX

    Used for thickening PlatSil Gel-10 and enabling brushing or layering of the liquid silicone. Adding 1% by weight to the total mix will create a light bodied, non sag gel. Adding amounts up to 5% will create a thicker mix.

    from $18.15
  • Vario 40 Silicone Rubber
    Out of stock
    Vario 40 Silicone Rubber
    SRW-V40

    Vario is a high performance addition curing silicone with the unique ability to be blended for hardness and cure speed. Vario 15 and Vario 40 can be blended to achieve any hardness between 15A and 40A. Recommended for: Moulds, Skins, SFX, Props, Tinted Parts, ResinsPotlife & Demould: Work time - 90 mins / Demould time - 6-12 hrsHardness & Type:...

    from $38.50
  • Plastsil Gel-25 Hardener
    Product available with different options
    Platsil Gel-25 Hardener
    SR-PLATHARD

    from $14.30
  • Plastsil Gel-25 lv Deadener
    Product available with different options
    Platsil Gel-25 lv Deadener
    SR-PLATLVDEAD

    from $13.20
  • PlatSil Accelerator for Platsil Gel-10
    Availability: In Stock
  • M4642A/B Silicone Rubber
    Availability: In Stock
    M4642 Silicone Rubber
    SRW-4642

    M4642 is perfectly suitable for all moulds with undercuts that are to be reproduced in casting resins, & a certain inherent rigidity of the mould is required. M4642 is a food grade silicone rubber. Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness...

    from $51.70
  • Deadener for PlatSil
    Product available with different options
    PlatSil Deadener
    SR-PLATDEAD

    from $13.20
  • PlatSil 71R Retarder
    Availability: In Stock
    PlatSil 71R Retarder
    SR-PLATRET

    Platsil 71R Retarder is added to Platsil Gel-10 Part A prior to mixing with Part B to slow the cure giving a longer potlife and demould time. Adding 1% of the total A:B mix will roughly double the working time, 2% will triple the work time and 5% will extend the potlife to approximately 60 minutes. Care must be taken at high ratios as rates over 5% may...

    from $19.80
  • Stabilizer 43
    Availability: In Stock
    Stabilizer 43
    SRW-STAB

    A colourless, cloudy medium viscosity liquid with a faint odour. Exclusively used to thicken those addition curing RTV-2 silicone rubber grades of the Elastosil M46.. Series which are flowable as supplied

    from $27.50
  • Platsil Gel-00 Prosthethic Grade Silicone
    Availability: In Stock
  • Platsil Gel-25 Platsil Gel-25
    Availability: In Stock
  • M4601A/B Silicone Rubber
    Availability: In Stock
    M4601 Silicone Rubber
    SRW-4601

    Elastosil┬« M4601 is perfectly suitable for all moulds of models with pronounced undercuts that are to be reproduced in casting resins. M4601 is also a Food Grade Silicone Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness & Type:  Shore A28 +/-2...

    from $84.70
  • Platsil Gel-00 Prosthethic Grade Silicone Platsil Gel-00 Prosthethic Grade Silicone
    Availability: In Stock
  • M4644 Silicone Rubber
    Availability: In Stock
    M4644 Silicone Rubber
    SRW-4644

    M4644 is a high performance silicone mould-making compound that is suitable for reproducing models with undercuts in polyurethane or epoxy resins. M4644 is also a Food Grade Silicone Rubber Recommended for: Food Grade, Concrete, Plaster, Epoxy, PolyurethanePotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness & Type: Shore A40...

    from $51.70
  • Vario Catalyst F
    Availability: In Stock
    Vario Catalyst F
    SRW-VF

    Catalyst for Vario Range

    from $13.20
  • C1200A/B BluE C1200A/B BluE
    Availability: In Stock
    C1200 A/B Dispensable silicone rubber
    SRW-C1200

    C1200 has been specifically developed for the professional production of reusable vacuum bags, used in the production of composite parts.  Recommended for: Vacuum Bagging, Brush Moulds, Resin ResistancePotlife & Demould: Work time - 20 mins / Demould time - 1-2 hrsHardness & Type:  Shore A25 +/-2 Silicone Elastomer, Brush on

    from $82.50
  • M4670 A/B Food Grade Silicone Rubber M4670 A/B Food Grade Silicone Rubber
    Availability: In Stock
    M4670 Silicone Rubber
    SRW-4670

    Elastosil M4670 is suitable for food contact when cured properly and ideal for use with low melt alloys. M4670 is also a Food Grade Silicone Rubber. Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 60 mins / Demould time - 24 hrsHardness & Type: Shore A55 +/-2 Silicone Elastomer, 80000cps

    from $51.70
  • Pinkysil Putty Silicone Rubber
    Availability: In Stock
    Pinkysil Putty Silicone Rubber
    SR-PP

    Pinkysil Putty is a flexible silicone impression putty. A kneadable, addition-curing two component silicone putty that cures at room temperature with a convenient 1:1 ratio, colour indicator for mixing and extremely fast cure. The unique putty consistency allows the manufacture of quick impression moulds from practically any surface. 

    from $24.75
  • Vario 15 Silicone Rubber
    Availability: In Stock
    Vario 15 Silicone Rubber
    SRW-V15

    Vario is a high performance addition curing silicone with the unique ability to be blended for hardness and cure speed. Vario 15 and Vario 40 can be blended to achieve any hardness between 15A and 40A. Recommended for: Moulds, Skins, SFX, Props, Tinted Parts, ResinsPotlife & Demould: Work time - 90 mins / Demould time - 6-12 hrsHardness & Type:...

    from $38.50
  • Platsil Gel-10 Platsil Gel-10
    Availability: In Stock
  • Sil-Thix
    Available
    Sil-Thix Silicone Thickener
    SR-SILTHIX

    Sil-Thix is a unique thickener for most Silicone Mould Making Rubbers. It can be used with both Condensation and Addition Curing Systems. We recommend a maximum of 3% in Addition Cure Grades and 5% in Condensation Cure Grades. Sil-Thix CANNOT be used in M4503 or Ultrasil. We recommend a test for any non Barnes Systems.

    from $19.80
  • Platsil Gel-00 Prosthethic Grade Silicone Platsil Gel-00 Prosthethic Grade Silicone
    Availability: In Stock
    Platsil Gel-00 Prosthetic Grade Silicone
    SR-PLATGEL00

    Platsil Gel-00 Prosthetic grade addition-curing, two component silicone rubber that cures at room temperature. Recommended for: Skins, Prosthetics, SFX, Props, Lifecasting, Tinted PartsPotlife & Demould: Work time - 6 mins / Demould time - 30 minsHardness & Type:  Shore 00-30 +/-2 Silicone Elastomer, 22000cps

    from $24.20
  • RTV3428 Translucent Flowable Silicone
    Availability: In Stock
  • PLATSIL 71-11
    Available
    PLATSIL 71-11
    SR-PLATSIL7

    Replacement for Banana Skin

    from $71.50